APC Network Management Card AP9617 Podręcznik Użytkownika Pobierz pdf (Strona 54)

®®

USER’S GUIDE

network management card

SSH User Host Key File

Status: The Status field Indicates the status of the host key (private key). In the

control console, you display host key status by selecting Advanced SSH

Configuration.

• SSH Disabled: No host key in use: No host key has been transferred

to the Management Card or a host key has been transferred improperly.

NOTE:A host key must be installed to the /sec directory of the

Management Card

• Generating: The Management Card is generating a host key because

no valid host key was installed in its /sec directory.

• Loading: A host key is being loaded (i.e., being activated on the

Management Card).

• Valid: The host key is valid. (If you install an invalid host key, the

Management Card discards it and generates a valid one. However, a

host key that the Management Card generates is only 768 bits in length.

A valid host key created by the APC Security Wizard is 1024 bits.)

Filename: You can create a host key file with the APC Security Wizard and then

upload it to the Management Card by using the Web interface. Use the

Browse button for the Filename field to locate the file, then click Apply.

Alternatively, you can use FTP or Secure CoPy (SCP) to transfer the host

key file to the Management Card.

OTE: Creating and uploading a host key in advance reduces the time

required to enable SSH. If no host key is loaded when you enable SSH,

the Management Card creates one when it reboots. The Management

Card takes up to 5 minutes to create this key, and the SSH server is

not accessible during that time.

Option Description

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 189 190

Brak uwag

APC Network Management Card AP9617 Podręcznik Użytkownika Strona 54