Sidecar Installation
SPDU Installation Manual 29
11.Connect the ground busbar (refer to “Internal components” on page 3 and the step 8 graphic on
page 28 for location of ground bus) using the (2) angled splice plates. Three 1/4 x 20 x 1” bolts
are required. Torque to 6 ft-lbs.
12.Reinstall the sidecar’s external side panel.
SPDU
SIDECAR
Existing sidecar bus
Existing SPDU bus
Cabinet walls
G rou nd bu s sp li c e
(C/W 5/16” hardware supplied)
Komentarze do niniejszej Instrukcji