APC PDRPPNX10-M Dokumentacja Pobierz pdf (Strona 18)

14 InfraStruXure System - Installation and Start-Up

Connect Utility Conductors to the PDU

Electrical Hazard: A licensed electrician must connect input conductors to the PDU!

Access the PDU Main Input switch

1. Open the back doors of the PDU, unlock the top, smaller door, using the provided red key.

2. Loosen the two screws holding the larger, hinged door in place.

Attach conduit to the PDU for the input conductors

1. Remove the rectangular gland plate by loosening the captive screws, using a Phillips or standard

screwdriver:

For wiring under a raised floor: Remove the plate in the floor of the PDU.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Brak uwag

APC PDRPPNX10-M Dokumentacja Strona 18