APC NBRK0570 Dokumentacja Pobierz pdf (Strona 14)

NetBotz Rack Monitor 450/550/570 Installation and Quick Configuration Manual8

Connect Sensors to Sensor Ports

This procedure applies to the following sensors, which are supported by the appliance and connect to the

sensor ports:

• Temperature Sensor (AP9335T)

• Temperature/Humidity Sensor (AP9335TH)

• NetBotz Vibration Sensor (NBES0306)

• NetBotz Smoke Sensor (NBES0307)

• NetBotz Spot Fluid Sensor (NBES0301)

• NetBotz 0-5 V Sensor Cable (NBES0305)

• NetBotz Door Switch Sensor for APC Racks (NBES0303)

• NetBotz Door Switch Sensor for Rooms or Third Party Racks (NBES0302)

• NetBotz Dry Contact Cable (NBES0304)

For sensors that connect to A-Link ports (Temperature Sensors with Digital Display

[AP9520T] and Temperature/Humidity Sensors with Digital Display [AP9520TH]),

see “Connect Sensors and Sensor Pods to A-Link Ports” on page 10.

Connect APC and third-party sensors to the six sensor ports labeled Sensors on the appliance.

• Third-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect

a sensor to the cable, follow the instructions provided with the sensor and the instructions

provided with the cable.

• Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305). To

connect a sensor to the cable, follow the instructions provided with the sensor and the instructions

provided with the cable.

• If a sensor cable is not long enough, use an RJ-45 coupling (provided with some sensors) and

standard CAT-5 cabling to extend the cable up to 15 m (50 ft) for a Temperature/Humidity Sensor

(AP9335TH) or a Temperature Sensor (AP9335T) and up to 30.5 m (100 ft) for all other

supported sensors.

Below is a list of the different pod/sensor types and the number of devices each appliance can support.:

Pod/Sensor Type Rack Monitor 570 Rack Monitor 550 Rack Monitor 450

Camera Pod 160

total of 4 pods total of 4 pods* total of 2 podsCamera Pod 120

CCTV Adapter Pod 120

Sensor Pod 150

total of 12 pods total of 12 pods total of 2 pods

Sensor Pod 155

Sensor Pod 120

4-20 mA Input Pod 120

Smoke Sensor 2 2 2

AP9520 Temp/Humidity

Probe (A-Link)

888

* Installing four camera pods requires an external USB hub.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Brak uwag

APC NBRK0570 Dokumentacja Strona 14