APC Network Management Card AP9617 Podręcznik Użytkownika Pobierz pdf (Strona 132)

®®

USER’S GUIDE

network management card

126

SNMP issues

The following table describes known SNMP problems.

Problem Solution

Unable to perform a

GET

• Verify the read (GET) community name.

• Use the control console or Web interface to ensure

that the

NMS has access. See SNMP.

Unable to perform a

SET

• Verify the read/write (SET) community name.

• Use the control console or Web interface to ensure

that the

NMS has write (SET) access. See SNMP.

Unable to receive traps at

the

NMS

Query the mconfigTrapRecei verTable PowerNet MIB

OID to see if the NMS IP address is listed correctly, and

the community name defined for the

NMS matches the

community name in the table. If not, use

SETs to the

mconfigTrapReceiverTable

OIDs, or use the control

console or Web interface to correct the trap receiver

definition problem. See SNMP.

Traps received at an

NMS

are not identified

See your NMS documentation to verify that the traps are

properly integrated in the alarm/trap database.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 149 150

Brak uwag

APC Network Management Card AP9617 Podręcznik Użytkownika Strona 132