APC ACRC103 Dokumentacja Pobierz pdf (Strona 21)

15InRow Half-Rack RC Installation

Stabilizing the Equipment

Floor brackets

To prevent the equipment from moving from its final location (if it is not joined with an enclosure), use

the included bolt-down kit (AR7701). Follow the installation instructions included with the kit.

Joining to enclosures

NetShelter

SX enclosure. Two

joining brackets are installed on the front

and rear of the equipment. Depending on

how the holes on the joining brackets are

used, you have the option of either 24-in

or 600-mm spacing.

1. Remove the front and two rear

doors from the equipment. See

“Door removal” on page 13.

2. Locate the four joining brackets

on the equipment. Rotate each

bracket 90° toward the adjoining

enclosure so that the bracket is

parallel to the floor.

3. Install the brackets using the

Phillips screws provided with the

equipment.

NetShelter VX enclosure. The equipment may be joined to a NetShelter VX enclosure (24-in spacing

only) by using an accessory kit (AR7602), sold separately.

na1573a

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Brak uwag

APC ACRC103 Dokumentacja Strona 21